Perkin Elmer DSC 6 Differential Scanning Calorimeter

DSC Type: Disc-type heat flux design
DSC Cell: Low mass furnace with rust-free solid metal
Sensor: Precisely machined disc of Chromel alloy (90% Nickel/10% Chromium)
Atmosphere: Static or dynamic, including nitrogen, argon, helium, carbon dioxide, air, oxygen or other inert or active
gases, over full temperature range.
Calorimetry: Accuracy Better than ±2%, Precision Better than ±1%
Sensitivity: Digital resolution 0.6 µW, Detectable peak 2 µW
Dynamic range: ±250 mW
Isothermal Drift (10 min): 100˚C < 3µW, 400˚C < 5µW
Signal Response: 1 mg Indium, 10˚C/min (Nitrogen purge), Peak Height 7 mW, Width at half height 0.6˚C, H/W Ratio 11.7 mW/˚C
Temperature range: -120˚C to +450˚C
Temperature: Accuracy ±0.2˚C, Precision ±0.1˚C
Scan Rates Heating: 0.1˚C to 100˚C/mi, Cooling 0.1˚C to 100˚C/min
Cooling Time: 300˚C to 50˚C, Under 7 minutes using C6 Chiller
Built-in Gas Controller: Precise mass flow controller, and gas switch from gas A to gas B, Gas type Pre-calibrated for N2, O2 and air, Pressure range 0.5 to 4 bar, Flow rate range 1 to 200 ml/min, Flow rate accuracy ± 1 ml/min, Time constant < 1 second
Dimensions (HxWxD): 170 x 360 x 400 mm
Weight: 13 kg

Including FTS Systems RS33DL circulating chiller