Sartorius Cubis MSA116P Microbalance – Complete Set

Sartorius Cubis MSA116P Microbalance – Complete Set

Professional Sartorius Cubis high-capacity microbalance with MSA116P weighing module, YAC01MSA display and control unit, YDP30 GLP printer, and YSH02 adjustable sample holder.

The MSA116P is specifically developed for accurately weighing very small quantities, even directly into relatively large laboratory containers. The balance has a maximum capacity of 111 g and a readability of up to 2 µg. Furthermore, the manufacturer states an optimal minimum weighing of approximately 1.64 mg for the 116P.

The YSH02 sample holder is made of titanium and is adjustable for various types of laboratory vessels. It is specifically suitable for the Cubis high-capacity microbalances, including the 116P. Technical specifications
Specification Data
Brand Sartorius
Series Cubis
Weighing module MSA116P
Configuration MSA116P-OCCE-DH
Type High-capacity microbalance
Weighing capacity 12 / 111 g
Readability 2 / 10 µg
Optimal minimum weighing approx. 1.64 mg
Typical stabilization time approx. 3.5 s
Typical response time approx. 10 s
Display YAC01MSA MSA display/control unit
Display type LCD with menu guidance
Printer YDP30 GLP/GMP printer
Sample holder YSH02, adjustable
Sample-holder material Titanium grade 2
Draft shield DH, motorized
Weighing pan approx. Ø50/90 mm depending on configuration
Application Micro and high-capacity micro weighing
GLP Yes, with YDP30 printer

The MSA display unit has a large LCD display with menu guidance and control buttons. The YDP30 supports GLP/GMP printouts and features RS-232 and USB connections.

Balance dimensions

For the MSA116P with DH draft shield, Sartorius provides technical drawings including:

Width: approx. 222 mm
Height: approx. 435 mm
Depth: approx. 358 mm
Height of the weighing section: approx. 291 mm
Weighing chamber width: approx. 222 mm
For the MSA116P, the relevant pan opening is approx. Ø50 mm.

The display/control unit can be installed separately from the weighing module, meaning the total required workspace depends on the chosen configuration. YDP30 GLP printer

YDP30 dimensions: 241.3 × 139.9 × 177.4 mm (W × D × H). The printer is suitable for GLP/GMP printouts on standard paper and self-adhesive labels.

Complete set

The set consists of:

Sartorius Cubis MSA116P microbalance
MSA116P-OCCE-DH configuration
YAC01MSA display and control unit
YDP30 GLP/GMP printer
YSH02 adjustable titanium sample holder
DH draft shield

Status: balance set in GLP mode. Access to certain admin and service functions requires the relevant passwords/authorization details; these can be obtained via Sartorius Service.